DC Powered Remote Control and Monitoring Unit, 6 Isolated Voltage or current monitors, 4 Digital Inputs, 4 Digital Outputs, AC voltage monitor all accessible via the internet
The DC-RMCU1 DC-Powered Remote Monitoring and Control Unit, provides the ability to remotely monitor AC Line voltage up to 300 VAC, up to 6 DC Voltages and 1 temperature, monitor the status of up to 4 external alarms, as well as the ability to remotely control the state of 4 digital open-drain MOSFET outputs, all via the internet using any standard web browser. The Channel 1 DC voltage input is configured at the factory to measure current using the included 100 Amp/50mV shunt. A mobile friendly version of the status page is also included. Alarms and email notifications can be configured for the 6 analog voltage channels (high or low voltage), and email notifications can be configured for the Alarm inputs. A high-temperature alarm threshold can be configured to send an email notification, as well as control one of the digital outputs internally. The DC-RMCU1 also sends SNMP Traps for alarm conditions. The DC-RMCU1 can also be set to log measurements to a 2 GB internal micro SD card, and the measurements are time stamped with a real-time clock.